|
THE
£100M FAILURE Water vapour is extraordinarily invasive and the wastage it causes cost UK businesses hundreds of millions of pounds each year. Electronic failure, connection degradation, component rusting, and mechanical failures can all be caused by the simple misunderstanding that electronic enclosures designed to keep water out, also keep water vapour out. Very often they don’t. Many seals and enclosures are virtually useless when it comes to vapour – which can pass through them virtually unhindered to cause havoc within. Water vapour is omnipresent and insidious - unfortunately it can act in a counter-intuitive way in comparison to liquid water. Versaperm Limited, a world leader in water vapour permeability measurement, has introduced a quick and simple way to test this all-important water vapour permeability and transmission rates for most types of enclosure, seal, coating and container. The Versaperm WVTR (Water Vapour Transmission) meter can cope with several samples at a time - often giving a reading in as little as 30 minutes – whereas the traditional gravimetric measurement technique takes several days and is significantly less accurate. The meter is easy to use, it needs no re-calibration and requires, at most, minimal training to give results that are accurate to better than one part per million (with some samples accurate to a few parts per hundred million). Sensitivities are in the range 0.05 – 3200g/m2/day. Versaperm can not only supply
the equipment but also offers a testing service for a huge range of products
and packages – from enclosures and O rings through to microswitches
and missiles. ENDS for photographic downloads, click here Please send any sales enquiries to Christopher Roberts, Versaperm Limited , For further Press Information please contact Gerry Palmer @ the Palmer & Rose Partnership. Tel 01494 637499, fax
01494 452630,
|